Lithofin KF Stain-Stop - 1 LITRE

How to Use Lithofin KF Stain-Stop - 1 LITRE:

• The surface to be treated must be completely clean and dry.
• Shake Lithofin KF Stain-Stop - 1 LITRE well before use.
• Apply undiluted with a clean microfibre cloth or a lamb’s wool roller and ensure even distribution by wiping (rolling) over the surface several times.
• For best results, treat the surface in sections of approx. 15m² at a time.
• After 20 minutes, completely remove any surface residues with a squeegee and then with a dry cloth.
• Attention! Lithofin KF Stain-Stop - 1 LITRE must sink into the substrate. Immediately wipe off puddles and drips. Do not allow Lithofin KF Stain-Stop - 1 LITRE to dry on the surface. Carefully remove all residues and check against the backlight.
• Please Note: In rare instances, an impregnator may not suitable for some types of porcelain tiles. Always try Lithofin KF Stain-Stop - 1 LITRE in an inconspicuous area prior to use. Protect glass, varnished surfaces, plastics, etc. against splashes.
• Coverage: up to 40m² per LITRE, depending on the absorbency of the surface.

Safety

• Refer to the Safety Data sheet (SDS) before use
• Test in a small, hidden, area before the main application
• Keep away from heat and humidity
• Keep away from direct sunlight

Field of Use

• For protecting all newly laid absorbent polished and unglazed porcelain tiles in order to facilitate maintenance. Suitable for indoor and outdoor use.