WARNING: Avoid contact with skin and eyes. Ensure good ventilation to disperse vapours. Keep away from naked flames, heaters, and sources of ignition.

1. In order to determine whether Diversey Slate Seal Solvent will completely remove the sealer from your floor a test area of one or two tiles should be attempted before stripping your entire floor.
2. Wear suitable protective clothing and gloves.
3. Work in areas of 2 square metres at a time.
4. Apply SLATE SEAL SOLVENT to the area to be stripped with a paintbrush so an even coating is on the tile. Allow to stand for 15-20 minutes so Diversey Slate Seal Solvent may penetrate the surface and soften the coating.
5. Maintain a liberally coated surface by adding more SLATE SEAL SOLVENT as required as the product may evaporate.
6. Scrub with a stiff brush and wipe the treated area clean using a cloth.
7. Repeat steps 2 to 5 if any residue remains.

COVERAGE: 1 litre will cover approx. 8-10 square metres with two coats.

Application: For effective performance, a liberal coat of SLATE SOLVENT should be applied to the surface to be stripped using a paintbrush. The reaction time varies between 10 and 20 minutes depending on the type and number of coats of sealer to be removed.

NOTE: Not to be used on rubber, plastics, carpet, or previously coated surfaces that are affected by solvents, or any other surfaces which may be softened by solvents.

Safety:

Always read the label and follow directions for use. Kindly refer to the Safety Data Sheet (SDS) and Technical Data Sheet (TDS) before use.

Additional Information on Diversey Slate Seal Solvent: