Bellinzoni AQ Proof - 1L

Natural effect water-based water and oil sealer. Ready to use and suitable for protection and treatment of limestone, sandstine, terracotta, cement, unpolished stones, and agglomerate.

Bellinzoni AQ Proof protects against watery or oily/greasy dirt and it reduces the tendency of the material to get heavily soiled and in most cases does not change the original color of the treated stone surface.

Hardware Sealant.

Method of use:

1. Preparation: Ensure the surface is clean and dry. Remove stains, mildew, and any crusting as these will be more difficult to remove after applying the protection.
2. Application:

• Apply the product using a brush, roller, or spray gun.
• Recommended Method: Use a brush whenever possible as it helps the product penetrate deeply into the stone. Applying AQ PROOF with a brush and applying pressure will aid in penetration into frames and cavities.

3. Drying: Allow the product to dry naturally. This will ensure the stone is properly protected.
4. Excess Removal: If there is an excess of the product, remove it using a dry cloth or paper towel soaked with AQ PROOF.
5. Temperature: During application and drying, ensure the substrate temperature is between 10°C and 30°C (50°F to 86°F).
6. Special Instructions for Underfloor Heating: If applying to a floor with an underfloor heating system, turn off the heating and allow the stone to cool completely before application.

Coverage:

• Polished Granite: One liter of AQ PROOF can treat 20 to 30 sqm (210 to 350 sq. ft.), depending on the material's absorption and finish.
• Limestone, Sandstone, and Unpolished Marble: One liter can cover 10 to 15 sqm (120 to 200 sq. ft.).