• Aqua Mix Poultice Stain Remover - Stone Doctor Australia - Natural Stone > Stain Remover > Poultice
  • Aqua Mix Poultice Stain Remover - Stone Doctor Australia - Natural Stone > Stain Remover > Poultice
  • Aqua Mix Poultice Stain Remover - Stone Doctor Australia - Natural Stone > Stain Remover > Poultice
  • Aqua Mix Poultice Stain Remover - Stone Doctor Australia - Natural Stone > Stain Remover > Poultice - Review
  • Aqua Mix Poultice Stain Remover - Stone Doctor Australia - Natural Stone > Stain Remover > Poultice
1 7

Aqua Mix Poultice Stain Remover

Aqua Mix Poultice Stain Remover

8 Reviews
| Ask a question
$54.00
$44.00 $54.00
--23% OFF Sold out
Taxes included. Shipping calculated at checkout.
Size
FREE SHIPPING on orders above $199.00 Inc. gst (Shipping Policy)
View full details
Aqua Mix Poultice Stain Remover
Selected Variant Image
$54.00
$44.00 $54.00
Selected Variant Image
Aqua Mix Poultice Stain Remover
$54.00
$44.00 $54.00

Aqua Mix Poultice Stain Remover

Absorbent Clay to Remove Stubborn Stains

Aqua Mix Poultice Stain Remover is a non-acidic stain remover with dual-use. It is an absorptive clay developed to remove deeply embedded oil and grease stains without scrubbing.

Aqua Mix Poultice Stain Remover is a fine abrasive cleaning powder that eliminates surface stains as well as grout haze. Excellent for all natural stone and tile surfaces.

The key to removing a stain from a stone surface is to identify the type of stain. Play detective if you don't know what created the stain. What is the location of the stain? Is it near a plant, a food service area, or a cosmetics area? What colour is it? What is the pattern or shape? What happens in the proximity of the stain?

Surface stains are frequently removed by cleaning with a suitable cleaning solution or home chemical. Deep-seated or tenacious stains may necessitate the use of a poultice or the services of a specialist. Aqua Mix Poultice Stain Remover is one of the best stain removers recommended by Stone Doctor Australia.

For use on:

Aqua Mix Poultice Stain Remover is suitable for use on all natural stone surfaces (including granite, limestone, marble, slate, and travertine), porcelain, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other porous tile and grout surfaces.

Limitations:

Aqua Mix Poultice Stain Remover should not come into touch with any non-recommended surface. Some marbles' high-polished sheen may be dulled by little abrasive action or high RPMs on the surface.

AVAILABLE IN 0.34kgs & 2.7kgs AS WELL

Features of Aqua Mix Poultice Stain Remover:

  • Extremely efficient
  • Removes deep-set oil and grease stains effectively
  • Non-hazardous to use
  • Contains abrasive cleaning powder that is not acidic.
  • Excellent cleaning agent

HOW TO USE

How to Use Aqua Mix Poultice Stain Remover:

  1. When handling the product, wear chemical-resistant gloves, such as nitrile.
  2. Read the entire label before using it to remove deep-set oil and grease stains.
To make a thick, malleable paste, combine Poultice Stain Remover powder and water. The amount of Poultice Stain Remover required will be determined by the size of the stain. Apply a 1/4′′ (6 mm) thick layer of paste immediately over the stain, leaving at least a 1′′ (25 mm) overlap beyond the stain's edge. Wrap with plastic wrap or wax paper. Make a few very small holes in the plastic cover to allow for the least amount of air exposure. Allow the paste to dry on the stain for 24 to 48 hours. Remove Poultice Stain Remover using a plastic spatula or putty knife and rinse with clean water. If required, repeat the operation.

If the area darkens due to absorbed moisture, it should dry fully within 5 to 7 days.

  1. Read the entire label before using it for removing surface stains and grout residue.

To keep cleaning to a minimum, keep splattering to a minimum. Pre-wet a manageable amount of the surface with water, around 10 ft (1 M), and sprinkle Poultice Stain Remover over the area, mixing it into a thin slurry. If the surface is vertical, combine the slurry in a container and apply it to the pre-wet surface. Agitate by hand or with a white nylon scrub pad and a low RPM (175-350 RPM) buffer. Throughout the polishing operation, keep the surface damp. Clean towels or sponges should be used to remove the Poultice Stain Remover solution, and it should be rinsed twice with clean water. A wet/dry vacuum cleaner can be utilized. Rinse thoroughly with clean water and pat dry with clean towels.

NOTE: Aqua Mix Poultice Stain Remover is a fantastic solution that will improve the cleaning power of numerous Aqua Mix® cleaners, including Phosphoric Acid Substitute, Heavy-Duty Tile & Grout Cleaner, and Stone Deep Clean.

Cleaning of equipment:

Before the material dries, clean the tools with water.

Safety

Before using Aqua Mix Poultice Stain Remover, please see the Safety Data Sheet (SDS).

ADDITIONAL INFORMATION

Additional Information on Aqua Mix Poultice Stain Remover:

Brand

Aqua Mix

Consistency

Poultice

Colour

White

Storage

Closed, Cool, Dry Place

Shipping Class

Non-Dangerous Goods

Customer Reviews

Clearance Deals

Deep discounts on items we’re letting go—shop today!

View all