Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit

Provides Very Sharp, Well-Defined Edges to A Painted Surface & Has Great Tensile Strength & Good UV Stability for Up To 60 days, Making It Immensely Popular When Working on Sensitive Paint Surfaces Due to Its Clean Removal.

Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit is a yellow (Japanese Flat Rice Paper) Tape coated with an acrylic adhesive system attached to a folded, electrostatically charged PE Drop Down Drape. The Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit has good UV stability (up to 90 Days Outdoors). The electrostatically charged drape clings to surfaces and attracts spray paint. Dried paint bonds to drape and does not drop off leading to less clean-up.

Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit is designed for quality masking applications. Flowmask’s thin construction and high tensile strength lend it to fine-line masking applications and detail work. The paper’s finish does not repel paints and so gives a clean edge on removal. Its high-temperature range makes it suitable for automotive low-bake ovens. The drape and tape act as a good keying surface for paints and have great stability so excellent for outdoor use, particularly in the marine environment.

Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit is also transparent. Because the adhesive is repositionable, it is simple to reposition, put on, and remove. If you have any concerns regarding the Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit, please contact us right away! We are glad to address your inquiries.

Features of Tenacious DD770 Flowmask Dispenser And Drop Down Tape - 1 Unit:

• Ultra-thin
• No Paint Bleed
• Crisp Clean Edge
• Easy, clean removal
• Suitable for delicate or curved surfaces
• Suited for all paints including two-pack
• UV Resistant
• Waterproof

Technical Details:

Gauge: 0.087mm

Elongation at Break: 3.5%

180° Peel Adhesion: 2.1 N/cm

Tensile Strength: 36.1 N/cm

Service Temperature: 0°C to 100°C

Surface Preparation

The surface on which the tape is to be used must be clean, dry, and free from grease and dust. Remember that pressure-sensitive adhesives must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 30ºC.

Storage

Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

DISCLAIMER:

Values: All values presented have been determined by standard test methods and are average values only.

Recommendations: Whilst we are happy to recommend products from our range for applications, it is imperative that the customer/user complete their own tests to determine suitability for their application under “working conditions” and if longevity is important, that ageing tests be carried out.

Warranty: We can only warranty our products to the level that they are consistent with our Product Information Sheet values

BUT CAN NOT accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations.

NOTE 1: ALSO AVAILABLE IN CARTON QUANTITY OF 12 UNITS

NOTE 2: OTHER SIZES AVAILABLE 1800mm x 33m & 2700mm x 17m

NOTE 3: DRAPE REFILL PACKS AVAILABLE