Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m

Solvent-Free Pressure Sensitive Acrylic Resin Coated Adhesive Film for Short Term Hard Surface Protection

Polythene is often used as a protective coating over a broad range of flat substrates, including painted metal, plastics, glass, and even carpeted, wood, or vinyl floors. The gauge and adhesion will be determined by the type of the surface and the environmental conditions to which it will be subjected.

One of the best floor protection films to employ is the Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m. The Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m is made from Polyethylene film that has been covered with a solvent-free pressure-sensitive acrylic resin adhesive.

The most common use for Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m is surface protection of most plastics, GRP, glass, stainless steel, and aluminum (anodised & un-anodised). This Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m is suitable for rough surfaces and painted steel finishes that may be molded. (Film also helps to lengthen the life of forming equipment.)

If you want to learn more about temporary floor surface protection, check out How to Keep Floors Damage-Free When Remodeling or Renovating.

If you have any questions about the Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m, give us a call at (03)-9429 1223 and we will gladly assist you!

Features of Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m:

• Acrylic emulsion adhesive
• Transparent blue colour
• Suited to textured surfaces and painted steel finishes
• Coated with solvent-free pressure sensitive acrylic resin adhesive

HOW TO USE

How to Use Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m:

Surface Preparation:

The surface on which the Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m will be used must be clean, dry, and free of oil and dust. Remember that pressure sensitive adhesive must be applied with the greatest amount of force feasible in order to obtain maximum adhesion levels. The suggested application temperature ranges from 15ºC and 25ºC.

Storage

Before using Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m, tapes that have been stored below the minimum application temperature must be warmed up to that temperature. This might take up to 24 hours to complete.

Safety

Before using Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m, please see the Safety Data Sheet (SDS) and Technical Data Sheet (TDS)

ADDITIONAL INFORMATION

Additional Information on Medium Tack Polyethylene Timber and Tile Temporary Floor Protection Film 610mm x 100m: