How To Use Lithofin Resin-Ex - 1 Litre:

1. Test the product prior to use.
2. Always apply to a dry surface.
3. Protect the surface from wetness during the working time because water represses the effectiveness.
4. Application-/surface temperature: 10 - 30°C.
5. The mentioned working times are shorter at higher temperatures and longer at colder temperatures.

Directions to remove pavement fixing mortar

Generously apply to the dry surface using a brush or a scrubber. Allow working for up to approx. 30 min. at room temp. of about 20°C. Then add water (best if diluted 1:10 with Lithofin MN Power-Clean) and brush. Afterward, rinse and brush. Always brush diagonally to grouts. Rinse the surface again with water. In case of any leftovers, repeat when the surface is dry. Coverage: up to approx. 5 m²/L, depending on dirt.

Directions to remove epoxy resin (2K) mortar

Generously apply to the dry surface using a brush or a roller. Allow working for approx. 2 hrs. at about 20°C. Then use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub. Remove excess fluid and rinse with water immediately. Coverage: up to approx. 20 m²/L on glazed tiles

Safety:

Refer to the Safety Data Sheet (SDS) for Lithofin Resin-Ex - 1 Litre before use.

Note: Kindly refer to the Technical Data Sheet (TDS) for Lithofin Resin-Ex - 1 Litre for complete details. The above consist of important extracted information only and not all.

Additional Information on Lithofin Resin-Ex - 1 Litre: