Lithofin Nanotop

• The area to be treated must be absorbent, completely dry, clean as well as free of oil, wax and grease. 
• The surface temperature must lie between 10°C and 25°C.
• Always test the product on a spare piece.
• Apply Lithofin NanoTOP undiluted and evenly with a clean brush, roller or cloth. 
• On highly absorbent surfaces, the application may have to be repeated after about 10 min.
• Allow to penetrate for 20 minutes. 
• Important for unpolished surfaces: do not allow the surface residues to dry, wipe off with clean cloth. 
• On polished surfaces: product residues can be removed with a micro fibre cloth for up to 12 hours.
• Please Note: glass, ceramics, wood, and other surfaces sensitive to solvents must be protected against splashes.
• Fully drying time is approximately 2 hours and the product will fully effective after 5 days.

Safety

• Refer to the Safety Data sheet (SDS) before use
• Test in a small, hidden, area before the main application
• Keep away from heat and humidity
• Keep away from direct sunlight
• Use in a well-ventilated area