Lithofin MN Colour-Intensifier

How to Use Lithofin MN Colour-Intensifier:

• The surface to be treated must be completely dry and clean.
• Always try the Lithofin MN Colour-Intensifier in an inconspicuous area prior to use.
• Evenly apply a consistent amount of Lithofin MN Colour-Intensifier with a clean brush, a roller or a cloth.
• On highly absorbent surfaces, this procedure may have to be repeated after five minutes.
• Lithofin MN Colour-Intensifier should saturate the stone without drying on the surface.
• Less absorbent surfaces may have to be toweled off.
• Attention! treat only completely dry surfaces (drying time for newly laid surfaces; up to 8 weeks; after rain or after cleaning: several days). Non-absorbent surfaces such as polished or fired materials such as porcelain or ceramic tiles can’t be treated. Glass, wood, plastics and other surfaces sensitive to solvents must be protected against splashes.
• Application Temperature: the temperature of the surface should be between 5°C and 25°C. Switch off under floor heating.
• Drying Time: safe to walk on after approx. 30 minutes, completely dry after 24 hours.
• Coverage: approx. 5 to 10 m²/L depending on the surface.
• Durability: indoors and with correct maintenance nearly unlimited. Outdoors, depending on the type of stone, the colour will remain for approx. 1 to 2 years, the protective effect for several years. Can be reapplied when the effect fades.

Safety

• Refer to the Safety Data Sheet (SDS) for Lithofin MN Colour-Intensifier before use.

Field of Use:

• For adding lustre to wall and floor surfaces, stairs, entrance areas, terraces, etc. which appear bland and colourless. Lithofin MN Colour-Intensifier is suitable for indoor and outdoor use
• Surfaces: all absorbent, porous natural stones (e.g. granite, gneiss, porphyry, marble, limestone, slate, etc.) and engineered stones with rough, sawn, honed and flamed surfaces.
• Please Note: for protecting polished and very finely honed natural and artificial stones, we recommend Lithofin Stainstop W or Lithofin MN Stain-Stop. On limestone use Lithofin MN Stain-Stop ECO.