Lithofin Care Kit With Sealer For Natural Stone - BE

How To Use Lithofin Care Kit With Sealer For Natural Stone - BE:

• Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface.
• In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute.
• Allow the product to work for approx. 15 minutes; brush occasionally.
• Do not allow to dry, add water if necessary.
• Brush again before wiping up.
• On large areas, use a squeegee or a wet vacuum to remove the product.
• Wash the surface thoroughly with clean water.
• If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously.
• Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use.
• Coverage: as supplied: approx. 10m² depending on dirt diluted: up to 30m².
• Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF. For cement residues and rust discolorations on granite, gneiss and similar acid resistant stones, use Lithofin MN Builders-Clean.

 Product No. 2 In This Lithofin Care Kit With Sealer For Natural Stone - BE

Lithofin MN Stain-Stop

• The surface to be treated must be absorbent, clean and completely dry.
• Suitable application tools: cloth, brush or sponge.
• Without prior experience or in cases of doubt, try the product in an inconspicuous area prior to use.
• On large surfaces, work in small sections of 10 to 15m².Apply Lithofin MN Stain-Stop generously until the surface appears wet.
• Allow the product to penetrate for approx. 15 minutes.
• Redistribute the excess product and remove puddles and streaks.
• On highly absorbent materials or on dry spots more product may have to be added.
• Remove all remaining product residues within 30 minutes using a dry microfibre cloth.
• On large surfaces use a squeegee to remove excess with a polishing machine and a white pad.
• Attention! the liquid product must penetrate into the stone.
• Do not allow the product to dry on the surface.
• Please Note: non-absorbent or damp surfaces cannot be impregnated. Glass, ceramics, and surfaces sensitive to solvents (varnishes, wood, etc.) must be protected against splashes.
• Application Temperature: the temperature of the surface should be between 10°C and 25°C. Switch off under floor heating.
• Drying Time: after approx. 2 hours surface will be dry and ready to be stepped on carefully. Drying process will be complete after 24 hours, do not cover or use suction lifters during this time. Wipe up any spills immediately. The full effectiveness of the impregnator is reached after 5 days.
• Coverage: depends on the absorbency of the stone.
• Estimates: polished surfaces: 12 to 15 m²/L very dense stones: up to 40 m²/L rough/honed granite: 5 to 7 m²/L porous sandstone: 3 to 6 m²/L.

  Product No. 3 In This Lithofin Care Kit With Sealer For Natural Stone - BE

Lithofin MN Easy-Clean

• Spray Lithofin MN Easy-Clean on the entire surface.
• Allow the product to work briefly, then wipe the surface with a microfibre cloth.
• Surface may have to be buffed with a dry cloth.
• Please Note: do not spray on hot surfaces.
• Coverage: up to 20m² per bottle. For more stubborn dirt we recommend Lithofin MN Power-Clean

Safety

• Refer to the Safety Data Sheet (SDS) for Lithofin MN Power-Clean before use.
• Refer to the Safety Data Sheet (SDS) for Lithofin MN Stain-Stop before use.
• Refer to the Safety Data Sheet (SDS) for Lithofin MN Easy-Clean before use.

* All the above 3 products makes the This Lithofin Care Kit With Sealer For Natural Stone - BE complete.

Field of Use

Product No. 1 In This Lithofin Care Kit With Sealer For Natural Stone - BE

Lithofin MN Power-Clean

• For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces.
• Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble.
• Suitable for indoor and outdoor use.

Product No. 2 In This Lithofin Care Kit With Sealer For Natural Stone - BE

Lithofin MN Stain-Stop

• For invisible protection against staining and for facilitating maintenance of all-natural stone surfaces, including polished marble.
• Perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces.
• Suitable for indoor and outdoor use.
• Please Note: marble and limestone will remain sensitive to acid.

Product No. 3 In This Lithofin Care Kit With Sealer For Natural Stone - BE

Lithofin MN Easy-Clean

• For regular, every-day cleaning of all small natural stone and quartz surfaces such as kitchen work tops, table tops and in sanitary areas.
• Specially formulated for use on marble and limestone. Also suitable for ceramics, glass and plastic surfaces.

Lithofin MN Power-Clean

   

Lithofin MN Easy-Clean

   



Lithofin MN Stain-Stop