How to Use BONA Timber Floor Refresher - 1 Litre:

• The surface to be treated must be free from oil, wax, and other contamination.
• Floors that have been oiled or previously treated with polish, wax, or similar
  cannot be treated with Bona Refresher.
• A trial application/adhesion check must always be conducted on every floor.
• Refresher is not suitable for use on matt or extra matt surfaces.
• Remove loose dust/grit etc. using a vacuum cleaner, scissor mop, or other dry-cleaning
• Clean the floor thoroughly using Bona Wood Floor Cleaner.

NOTE: The floor must be completely dry before applying Bona Refresher. It is vitally important that the floor is clean before application as any dirt left on the surface of the floor will become ‘encased’ below the Refresher application.

Application:

1. Gently agitate the contents by turning the container several times before opening. Apply Refresher with the Bona Microfibre applicator pad. Prepare the applicator pad by lightly dampening it with water.
2. Apply a 3 – 4cm wavy line of Refresher on the floor. Using this product spread a thin consistent coat evenly across a small section, approx. 3 m2. Control environmental conditions to reduce airborne dust and airflow.
3. Even out the applied Refresher by drawing the applicator smoothly across the floor, going with the grain of the wood. Continue the process until the entire floor has been coated. Always coat the whole floor to ensure an even appearance and sheen. Take care to observe the coverage rate.
4. Allow Refresher at least 2 hours to dry before walking on the floor. If the appearance is uneven in sheen or minor streaking is evident a second coat may be applied after this time. Avoid heavy traffic and replace furniture for 24 hours.

Maintenance:

• Wet cleaning of the floor can be resumed after one week. Clean the floor with Bona Wood Floor Cleaner and a microfibre pad.
• In contrast to floors maintained with polish-based systems, a floor maintained using Bona Refresher can be overcoated in the future using a Bona finish.
• Information regarding overcoating can be found on the finish product datasheet and the Overcoating Instructions datasheet

Safety:

Before using this product, please read and understand the information on the label, the Safety Data Sheet (SDS), and the Technical Data Sheet (TDS).

Additional Information on BONA Timber Floor Refresher - 1 Litre: