Bellinzoni Eureka For Quartz - 1kg

1. Preparation: Ensure the surface is dry and clean. Wash to eliminate dirt and any residues of old waxes and treatments (use Bellinzoni ULTRA STRIPPER), rinse well, and dry.
2. Polishing:

• Place a small quantity of Eureka Quartz (10-15 g) on the surface.
• Moisten with a few drops of water.
• Use an orbital sander with adjustable speed set to low speeds (800-1500 rpm, optimal is 1000 rpm).
• Work the surface until the gel is completely dry and shiny.

3. Cleaning: Clean any residues with water and a neutral detergent. Repeat if necessary.

Floor Application:

1. Preparation: Ensure the surface is dry and clean. Thoroughly wash the floor with a single brush and appropriate disc, eliminating dirt and residues of old waxes and treatments (use Bellinzoni ULTRA STRIPPER), rinse well, and dry with a wet vacuum cleaner.
2. Polishing:

• Place about 30 grams of Eureka directly on the floor, under the natural bristle disc.
• Moisten slightly, then spread with a single brush (150-400 rpm and minimum weight of 30 kg) over approximately 1-2 m².
• Spray or pour water if the gel dries too quickly during processing.
• Work the surface until the gel dries, achieving the desired shine.

3. Cleaning: Wash and rinse with water and an alkaline substance (soda, bicarbonate, or Bellinzoni LEM-3 or ULTRA STRIPPER) to eliminate product residues and neutralize residual acidity.

Bellinzoni Eureka Quartz Resin offers a superior solution for maintaining and enhancing the beauty of your quartz-resin surfaces, ensuring they remain vibrant and flawless with minimal effort.